Regal 2000 Instrukcja Właściciela Pobierz pdf (Strona 115)

Your transducer is the device mounted on the hull bottom that sends

out sonar signals that rebound upon hitting the bottom of a lake

or ocean. These signals are measured, and converted into a usable

depth measurement displayed by the depth gauge at the helm. This

system does not register signal deﬂ ections due to ﬁ sh. Access the

transducer for removal via an access plate in the ski locker. Note that

the transducer is a sealed, non-serviceable unit.

All of your electrical systems onboard your Regal eventually connect

with your battery. This is where electrical power originates. In order

for any electrical systems to receive power, with the exception of your

automatic bilge pump function and stereo memory require the battery

switch to be turned “ON”. The two excluded systems have a direct

battery feed a tall times without the use of the battery switch. The

battery switch connects the battery to all deck and engine circuitry. It

is important to turn your battery “ON” before each trip, and “OFF”

at the end of each trip to avoid battery drain.

Never turn the battery switch to the “OFF” position when the engine

is running as alternator or other electricial system damage will occur.

Also, for extended non-use turn the battery switch to “OFF”.

4-9

Systems

Battery Switch/Battery Switch Box

Transducer

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 281 282

Brak uwag

Regal 2000 Instrukcja Właściciela Strona 115